Hot Dip Galvanized Octagonal Pole
Hot Dip Galvanized Octagonal Pole

Hot Dip Galvanized Octagonal Pole

Name: China Customized Hot Dip Galvanized Octagonal Pole Suppliers, Manufacturers - Factory Direct Wholesale - PHOEBUS
Brand: Phoebus
SKU: 263004869

Place of Origin:Jiangsu, China
Material:Steel, Metal
Type:Single Arm
Shape:Round, Octagonal, Dodecagonal or Customized
Application:Street light, Garden light, Highway light or Etc.
MOQ:1 Set

Send Inquiry

Description

Technical Parameters

Products Description

Hot dip galvanized octagonal pole has eight edges in its cross section, and is mainly used to fix signal lights and traffic signs. The material is selected from high-quality internationally marked low-silicon, low-carbon, high-strength Q235, and the size specifications can be processed according to user requirements, and equipment brackets are reserved. The bottom flange thickness is ≥14mm, with strong wind resistance, high strength, and large load-bearing capacity.

Products Data

Product Name	Hot Dip Galvanized Octagonal Pole
Material	Commonly Q345B/A572, Q235B/A36, Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, ST52
Height	5M	6M	7M	8M	9M	10M	12M
Dimensions(d/D)	60mm/150mm	70mm/150mm	70mm/170mm	80mm/180mm	80mm/190mm	85mm/200mm	90mm/210mm
Thickness	3.0mm	3.0mm	3.0mm	3.5mm	3.75mm	4.0mm	4.5mm
Flange	260mm*14mm	280mm*16mm	300mm*16mm	320mm*18mm	350mm*18mm	400mm*20mm	450mm*20mm
Tolerance of dimension	±2/%
Minimum yield strength	285Mpa
Max ultimate tensile strength	415Mpa
Anti-corrosion performance	Class II
Against earthquake grade	10
Color	Customized
Surface treatment	Hot-dip Galvanized and Electrostatic Spraying, Rust Proof, Anti-corrosion performance Class II
Shape Type	Conical pole, Octagonal pole,Square pole, Diameter pole
Arm Type	Customized: single arm,double arms,triple arms,four arms
Stiffener	With big size to strength the pole to resist the wind
Powder coating	Thickness of powder coating is 60 -100um. Pure polyester plastic powder coating is stable and with strong adhesion & strong ultraviolet ray resistance. The surface is not peeling even with blade scratch (15×6 mm square).
Wind Resistance	According to local weather condition, General design strength of wind resistance is ≥150KM/H
Welding Standard	No crack, no leakage welding, no bite edge, weld smooth level off without the concavo-convex fluctuation or any welding defects.
Hot-Dip Galvanized	Thickness of hot-galvanized is 60 -100um. Hot Dip Inside and outside surface anti-corrosion treatment by hot dipping acid. which is in accord with BS EN ISO1461 or GB/T13912-92 standard. Designed life of pole is more than 25 years, and the galvanized surface is smooth and with the same color. Flake peeling hasn't been seen after maul test.
Anchor bolts	Optional
Material	Aluminium,SS304 is available
Passivation	Available

Products Features

1. Hot dip galvanized octagonal pole and its main components should be durable structures, made of materials that can withstand certain mechanical stress, electric stress, and thermal stress. Such materials and electrical components should be moisture-proof, non-explosive, fire-resistant or flame-retardant products;
2. All exposed metal surfaces of the hot dip galvanized octagonal pole and its main components should be protected by a hot dip galvanized layer, the galvanized layer should be uniform and the thickness should not be less than 55μm;
3. Height tolerance of the hot dip galvanized octagonal pole and its main components is ±200mm;
4. Cross-sectional dimension tolerance of the hot dip galvanized octagonal pole and its main components is ±3mm;
5. Displacement tolerance of the tower axis after the hot dip galvanized octagonal pole and its main components is ±5mm;
6. Vertical tolerance of the hot dip galvanized octagonal pole and its main components is 1/1000 of the tower height;
7. Dimensions of the pole and its main components should be coordinated and consistent, and the outdoor camera monitoring position should play a good guiding and positioning role.