What Constitutes A Qualified Steel High Mast Lighting Pole?

The steel plate material for a steel high mast lighting pole is Q235, and the external shape is a polygonal tapered pole. The main pole needs to be equipped with an automatic lifting winch. The higher the pole, the greater the power of the lamps required, and the wider the illumination area. After the pole undergoes internal and external hot-dip galvanizing for rust prevention, the surface is then powder-coated for an aesthetically pleasing appearance. The entire pole should be free of any cracks, incomplete welds, continuous air holes, undercuts, etc. The welds should be smooth and flat, without any bumps or unevenness, and free of any welding defects. A set of steel high mast lighting poles is not inexpensive. Our factory needs to help customers rationally select the steel plate material, thickness, diameter, height, and light source size, helping them achieve the best lighting effect with the least amount of money.

Common light sources include high-pressure sodium lamps, metal halide sodium lamps, and LED energy-saving floodlights. Because LED floodlights are energy-saving, manufacturers now recommend that customers choose LED floodlights.

1. Light poles are typically 15-50 meters high, using polygonal (usually 8/12/16 sides) pull-out rods. Multiple pole sections use a plug-in structure: (under 20 meters, two sections, 6mm/8mm wall thickness; 25-30 meters, three sections, 6/8/10mm wall thickness; 35-40 meters, four sections, 6/8/8/10 or 6/8/10/12mm wall thickness). The plug-in length is 1.5 times the diameter of the plug-in end. The lamp panel is a frame structure; the bottom flange is circular.

2. All fixing bolts and nuts (except anchor bolts and nuts) of high mast lighting manufacturers should be made of stainless steel.

3. Hot-dip galvanizing process: Hot-dip acid pickling treatment should be used for both internal and external surfaces, with a thickness ≥80um. The designed service life should be no less than 30 years. The galvanized surface should be smooth and aesthetically pleasing, with a consistent color, and should not peel or flake after a hammer test.

4. Welding Process: The entire pole should be free of cracks, incomplete welds, continuous porosity, undercut, etc. Welds should be smooth and flat, without any bumps or unevenness, and free of any welding defects.

Advantages of Steel High Mast Lighting Poles

1. High Light Efficiency: High mast lamps have unidirectional light, avoiding light diffusion, ensuring illumination intensity, and improving illumination rate.

2. High Mast Lighting: High mast lamps are energy-saving and environmentally friendly lighting fixtures. Their light loss is very low, and they can still meet road lighting needs after more than ten years of use. Furthermore, they do not easily cause light pollution during use, making them a green light source.

3. Simple Installation: High mast lamps are very easy to install, requiring no buried cables, saving equipment costs.

4. Uniform Light Color: High mast lamps produce uniform light color, high brightness, and are not dazzling, which is extremely beneficial to human health.

5. High Cost-Effectiveness: High mast lamps have a long service life and require minimal maintenance, making them an excellent value for money.

High mast lighting requires advanced manufacturing technology and is therefore expensive. It is crucial to choose a reputable high mast lighting manufacturer to avoid unnecessary losses. Phoebus is a professional high mast lighting manufacturer, specializing in high mast lights, solar street lights, LED street lights, galvanized poles, decorative light poles, and other outdoor lighting fixtures. For more information on high mast lighting, please contact us.