Choosing Poles For Traffic Lighting

Now, customers usually place more value on the quality of the lights than the traffic lighting poles. That's not actually correct. A number of problems, including possible safety risks, can arise from poor-quality poles. When choosing a high-quality traffic lighting pole, take into account the following factors.

Ⅰ. Choose steel

Steel is the most commonly used material for traffic lighting poles due to its high strength, plasticity, and toughness. Superior steel can withstand winds as strong as level twelve. But low-quality steel, sometimes referred to as non-standard steel, doesn't adhere to national production standards.

Traffic lighting poles are built by unreliable manufacturers using non-standard steel. In many cases, unconventional steel is thinner than regular steel. Dishonest lighting pole manufacturers often apply several layers of powder coating to traffic lighting poles to increase thickness in order to meet acceptance standards. traffic lighting poles may sway or distort during high winds.

Weight is the most accurate measure of a traffic lighting pole's compliance with regulations. If you are unsure about the weight and specifications of the pole, you should compare prices from at least three suppliers. Significantly lighter poles of the same specifications ought to be regarded as non-standard.

II. Welding traffic lighting poles

Strict requirements must be fulfilled for signal pole welding because poor welding can result in pole breakage. Submerged arc welding is typically used to automatically weld the pole after it has been rolled up, producing smooth, consistent weld lines. Higher technical skills are needed for manual labor in areas where machine welding is not feasible. Observe carefully; a good weld will have a smooth surface without obvious porosity, weld beads, undercut, or other welding defects.

III. Galvanizing of traffic lighting poles

The galvanizing of traffic lighting poles is hot-dip galvanizing. Hot-dip galvanizing results in a rougher, silvery-white surface with watermarks and a few drips, especially noticeable at one end of the workpiece, after polishing, it is flat and smooth.

IV. Powder Coating of traffic lighting poles

The purpose of powder coating on traffic lighting poles is twofold: aesthetics and corrosion protection.

Uncertain powder coating colors on traffic lighting poles are considered subpar goods.

Reputable producers therefore grind their materials prior to powder coating in order to guarantee uniform application and more pure colors.

To fully understand a manufacturer's production process, a factory visit is necessary.

The craftsmanship of a traffic lighting pole is more significant than its materials when assessing its quality. Superior traffic lighting poles are safe and dependable, and they last at least 25 years.

Make sure the poles are carefully chosen and inspected before purchasing. Steer clear of dishonest manufacturers and select reliable products.

With a focus on personalized traffic lighting poles, lighting pole manufacturer Phoebus is the go-to partner for municipal traffic engineering projects! We build a variety of structures, including frame, integrated, single, and double cantilevers. Our products have a service life of more than 20 years because they are made of high-quality Q235 steel that has been expertly CNC cut, seamlessly welded, hot-dip galvanized, and powder coated for double corrosion protection. We allow you to change the pole height (3-12 meters), boom length, and flange size while adhering to traffic engineering standards, ensuring a stable installation and safe operation. We welcome inquiries from engineering contractors and purchasing agents across the nation!