How To Choose 20m, 25m, And 30m Lifting High Mast Lights?

20m, 25m, and 30m lifting high mast lights are commonly used in engineering projects. The selection should be made according to the lighting area, purpose of the site and environmental conditions to avoid energy wastage and provide adequate lighting. Phoebus, high mast light manufacturer summarizes the following points. Let's check it out.

I. 20m Lifting High Mast Lights

Suitable Application Areas:

Residential squares, small parking lots, town markets, small industrial parks; suitable lighting area of 1000-2000㎡; lighting coverage radius of 30-40 meters.

Core configuration:

150-300W LED light source, one light can meet basic lighting needs, if the brightness is higher, 2-3 lights can be combined, light pole is made of Q235 steel, thickness ≥6mm, suitable for normal wind conditions.

Selection Points:

Prefer electric lifting systems which are convenient to operate and low in maintenance cost Adopt standard-sized foundation components which do not require additional reinforcement and control procurement cost.

II. 25-meter Lifting High Mast Lights

Suitable scenarios:

Medium-sized stadiums, small town squares, highway service stations, logistics parks Suitable lighting area 2000-3500㎡, coverage radius 40-50meters.

Core Configuration:

300 - 500W LED lights , 3 - 4 lights for each unit area uniform illumination , pole thickness ≥ 8mm , optional hydraulic lifting system for stronger bearing capacity and multiple light sources

Selection Points:

If you are outdoors in a windy location, you need a wind-resistant design and lightning protection grounding equipment. Municipal engineering projects need to conform to the relevant technical standards. Anti-corrosion treated poles are preferred.

III. 30-meter Lifting High Mast Lights

Applicable scenarios:

Large stadiums, ports, large logistics parks, city center squares Suitable lighting area More than 3500㎡, coverage radius 50-60 meters.

Core Configuration:

Light source is high-power LED light of 500-1000 W, 4-6 lights are used to ensure brightness over long distances; pole thickness is ≥10mm, lifting system is necessary to ensure smooth and safe lifting.

Selection points:

Wind resistance reinforced, lightning protection and corrosion resistance design, suitable for complex environment such as coastal, high altitude. The material can be corrosion-resistant steel to extend service life; The foundation embedded parts should be correspondingly reinforced.

LED light sources are preferred for all heights due to their energy efficiency and long lifespan; the lifting system should be selected according to height: electric for 20 meters and above; selection should be based on budget, avoiding blindly pursuing high heights, and matching the scene.

Welcome to Phoebus for custom high mast lighting. We provide professional all kinds of high mast lighting. Mainly promote the solar powered high mast lighting series and lifting high mast lighting series.

Whatever it is, 20 meters, 25 meters, 30 meters, we can customize designs for squares, ports, parks, roads, and other situations, balancing lighting brightness, energy efficiency, and safety.

Wiring-free, energy-efficient, solar-powered high-mast lights. They are easy to maintain and provide a broad range of lighting. Customization of height, light source power, lamp panel style, and control system is supported. Reliable quality and cost-effective, these lights offer a one-stop solution for project procurement and bulk customization needs.