How To Adjust The Lamp Pole When It Is Tilted?

When the lamp pole is tilted, it needs to be straightened in time. Generally, the tilt angle of the lamp pole does not exceed 3°, and it can be straightened by manually adjusting the tilt angle of the lamp pole. However, when the angle between the pole body and the horizontal plane exceeds 3°, corresponding reinforcement treatment is required.

Reasons for the tilt of lamp poles:

1. Ground deformation: Ground deformation, such as loose soil, foundation sinking, etc., will cause the street light to tilt.

2. Improper maintenance: Long-term lack of maintenance or improper maintenance will cause the supporting structure of the lamp pole to loosen or be damaged, thus tilting.

3. External force: External factors, such as vehicle collisions, wind, etc., may also cause the lamp pole to tilt.

4. Construction problems: Construction problems of lamp poles, such as weak foundations and unstable supporting structures, may also cause tilting.

If the lamp pole is found to be tilted, it should be inspected and repaired in time to ensure normal use and pedestrian safety.

Check the degree of tilt of the lamp pole

If the lamp pole is tilted, the degree of tilt should be checked first. If the internal electrical parts are not damaged, just adjust the lamp pole to make the lamp pole vertical.

Adjust the lamp pole

1. Find the fixing bolts on the base of the lamp pole and remove them with a wrench or ladder.

2. Adjust the direction of the lamp pole in a safe way to make it upright. If you don't know how to adjust it, it is recommended to call the service hotline of the relevant department for help.

3. After adjusting the lamp pole, reinstall the fixing bolts to ensure that it is firm and reliable.

Check whether the lamp pole is damaged

Sometimes the lamp pole will be damaged after being hit by external force, and the lamp pole must be replaced at this time.

1. Check whether the lamp pole has cracks or signs of damage. If so, it is recommended to replace the new lamp pole immediately to prevent safety hazards.

2. If the lamp pole has no substantial damage, it can also be restored by changing the position of the accessories.

Maintaining lamp poles

During daily use, we need to regularly maintain and inspect the lamp poles to ensure their safe and stable operation.

1. When installing lamp poles, pay attention to the stability of the lamp poles and fix them firmly and reliably, including the bolts at the bottom.

2. Regularly maintain and inspect the street lights, check the tightness of each part every two years, clean the surface of the street lights, and eliminate potential fault factors.

Through the introduction of this article, I believe everyone knows how to adjust the lamp pole after it is tilted and how to maintain it. Strengthen the maintenance of lamp poles in life, and at the same time, ensure driving safety. With more than ten years of industry experience, Phoebus Light has established a full-chain service system covering design and development, production and manufacturing, installation, and maintenance. The professional design team can respond to customer needs quickly and provide solutions such as lighting distribution design and structural mechanics analysis; the production workshop strictly follows the ISO quality management system to ensure that the verticality and wind pressure resistance of each light pole meet national standards. If your project requires lamp poles, please feel free to contact lamp pole factory Phoebus!