Falling And Moving Street Light Poles

During municipal construction or road reconstruction, street light poles sometimes need to be fallen or moved. This process requires careful operation to ensure personnel safety and avoid damage to the surrounding environment. The following will introduce the methods of falling and moving street light poles in detail.

Preliminary investigation

1. Conduct a detailed investigation of the roads that need to be relocated to understand the road conditions, traffic flow, and other information, and provide basic data for scheme design.

2. Determine the lighting requirements after relocation based on road usage and traffic flow. Consider factors such as road width, speed limit requirements, and sight distance to ensure night driving safety.

3. Design a reasonable street light pole relocation plan based on road information and lighting requirements.

4. It is necessary to apply for a license from the relevant department. The specific application procedures and required materials may vary from region to region and generally require the provision of migration plans, engineering drawings, construction plans, etc.

Operation process

1. Use a crane or similar equipment to stabilize the street light pole to prevent accidental movement during the falling process.

2. Tie a rope near the bottom of the street light pole to control it during the lowering process.

3. Make sure all personnel stay away from the lowering area, especially the direction where the street light pole may fall.

4. Lower the street light pole slowly and steadily, and use ropes to adjust it to prevent it from falling suddenly or deviating from the predetermined direction.

5. After the street light pole is lowered, it should be handled in time, such as disassembly, transportation, etc.

6. After completion, a completion report needs to be submitted to the relevant department. The report should include the specific circumstances of the lowering, problems, and solutions during the construction process, etc.

For street light poles with relatively low height, manual lowering can also be considered, such as 6-meter-high street light poles. First, ensure that there is enough manpower, preferably multiple people working together. Secondly, use tools such as cranes or ropes to fix the street light pole to prevent accidental injuries when it falls. Then, tools such as axes or electric saws can be used to cut the bottom of the street light pole to separate it from the ground. Finally, slowly lower the street light pole by coordinating strength and angle. During the operation, safety is the most important thing to ensure that no people or property around are harmed.

If the high mast needs to be laid down, the operation also requires a strict set of procedures. ‌First, the professional team will survey the site, evaluate the height, weight, and surrounding environment of the high mast, and formulate a detailed laying plan. ‌Then, they will prepare the necessary tools and equipment, such as cranes, safety ropes, etc. ‌Before the operation, the team will ensure that all safety measures are in place, such as setting up warning signs and evacuating surrounding personnel. ‌Then, according to the predetermined plan, professional operators will carefully control the laying process of the high mast to ensure that it lands smoothly and safely. ‌

Sometimes, the project party needs to move the street light pole, such as in road construction, event venue layout, etc. So how to move the street light pole?

First, the street light pole needs to be disassembled. Use a screwdriver and a wrench to disassemble the light pole and the base, and then use a crane to lift the light pole from the base. Pay attention to controlling the strength and speed of the crane to avoid damage to the light pole.

Next, the base of the street light pole needs to be disassembled. Use a screwdriver and a wrench to remove the screws on the base to ensure that the connection between the base and the ground is released. Then, use a crane to lift the base from the ground. Also, pay attention to controlling the strength and speed of the crane to avoid damage to the base.

Before moving the street light pole, you need to choose a suitable location for placement. First, consider the lighting range and lighting effect of the street light pole and choose a location that can meet the lighting needs. Secondly, consider the stability and safety of the solar street light and choose a location with flat terrain and solid soil. Finally, consider the coordination between the street light pole and the surrounding environment and choose a location that is coordinated with the surrounding buildings, vegetation, etc.

If you are interested in this article, please contact street light pole wholesaler Phoebus to read more.