Regular Maintenance Of Metal Lamp Posts

Metal lamp posts are outdoors for a long time, and the dust and corrosive substances deposited on them can easily affect their appearance and use effect, so it is particularly important to clean and maintain metal lamp posts regularly. Cleaning involves the surface and interior of metal lamp posts, and maintenance mainly involves cleaning and protecting the lamps and inspection doors. The following are the specific steps for maintenance:

Cleaning and maintenance

1. Clean regularly, wipe the surface of metal lamp posts with a soft cloth, and remove various fleas, spider webs and other foreign objects. If you find traces of iron drills, you should remove them in time.

2. Perform leakage detection regularly to prevent damage to electrical components.

3. Check and clean the interior regularly to avoid circuit short circuits and lamp burnouts.

4. Do not wipe with hard objects to prevent scratching the surface.

Paint maintenance

Some people often wonder why metal lamp posts need to be sprayed. Spraying is mainly to protect the poles themselves. External corrosive substances or ultraviolet rays will accelerate the aging of the metal lamp posts or the surface of the poles, causing the metal lamp posts to lose their luminous effect faster. For metal lamp posts that are used outdoors for a long time, regular painting and maintenance are also required. The painting maintenance methods are as follows:

1. Make sure the surface is clean and there are no problems with the paint, such as peeling.

2. Fine sand and detergent can be used to clean the surface of metal lamp posts.

3. If cracks and rust are found, the part should be polished with tools such as files first.

4. It is best to spray preservatives before painting to protect the durability of the surface.

Maintenance suggestions: Under normal circumstances, outdoor metal lamp posts should be painted once every 3 years.

Replace electrical components

The performance of electrical components of metal lamp posts will decrease over time, so electrical components should be checked frequently and replaced in time. The following links are involved:

1. Replace bulbs: If the bulbs of metal lamp posts lose their brightness, they need to be replaced with new bulbs in time.

2. Check the circuit: Check whether the circuit is intact. If there is a problem with the circuit, it must be solved in time to avoid long-term light outages.

3. Check the switch: Check whether the switch is operating normally and whether there are any abnormalities.

4. The inspection door is usually 35-50cm away from the ground. There are many factors that may cause damage by human intervention. It is generally recommended to use anti-theft screws. If they are lost, they should be replaced in time to prevent electrical safety accidents that may affect the appearance of metal lamp posts.

5. Reinforcement and repair: For loose, tilted, or damaged metal lamp posts, they should be reinforced or repaired in time. Reinforcement measures may include adding support structures, replacing damaged parts, etc.

For outdoor metal lamp posts, timely maintenance is very important, only in this way can it achieve the maximum lighting effect. It is recommended to regularly clean and maintain metal lamp posts, paint them, and replace electrical components in time so that your metal lamp posts can glow for a long time.

Follow Phoebus, a China metal lamp posts manufacturer with 20 years of production experience.